Filter
Top Products
65
QL Series User Guide
Label Specifications
QL220/220 Plus QL320/ 320 Plus QL420/420 Plus
Label/Tag Width .75 in. to 2.12 in. 1.5 in. to 3.1 in. 2 in. to 4.1 in.
(16 to 53.8 mm) (38.1 to 78.4 mm) (50.8 to 104.1 mm)
Max. Label/ 20 in. (508 mm) 16 in. (406.4 mm) 20 in. (508 mm)
Tag Length
(w/std. memory)
Inter-label Gap. 0.08 in. to 0.16 in. (.12 in. preferred)
(2 mm to 4 mm [3 mm preferred])
Label Thickness .0025 in to .0065 in (.064 mm to .165 mm)
Tag Thickness .0060 in. (.152 mm) maximum
Max. Label Roll dia. 2.2" (55.9 mm) O.D 2.625 in. (66.7 mm) O.D.
Label Inner Core 0.75 in. (19 mm) minimum dia;
1.38 in. (35.05 mm) minimum dia for linerless media
(QL420 accepts linerless media on 0.75 in. cores.)
Black Mark The reflective media black marks should
Dimensions extend past the centerline of the roll.
Media Minimum mark width: 0.5 in. (12.7mm)
Requirements perpendicular to edge of media, centered within
the width of the roll.
Mark length: 0.094 in. (2.4 mm) parallel to edge of media
Use Zebra brand direct thermal media that is outside wound. Media may be reflective
(black mark) sensing, or transmissive (gap) sensing, die-cut, continuous, or linerless.
QL 420 models will accept fanfold media if used with an external media supply.
For die-cut labels, use only full auto dies.