Filter
Top Products
107
Printer Configuration and Adjustment
Remove Used Ribbon
8/22/12 P1048261-004
Remove Used Ribbon
Remove used ribbon from the ribbon take-up spindle each time you change the roll of ribbon.
To remove used ribbon, complete these steps:
1. Has the ribbon run out?
2. Slide the core with the used ribbon off of the ribbon take-up spindle.
3. Discard the used ribbon. You may reuse the empty core from the ribbon supply spindle by
moving it to the ribbon take-up spindle.
4. Reload the ribbon following the instructions in Load the Ribbon on page 55.
If the ribbon... Then
Ran out Continue with the next step.
Did not run out
a. Cut or break the ribbon before the ribbon take-up
spindle.
b. Continue with the next step.