Filter
Top Products
67
Printer Setup
Load the Media
8/22/12 P1048261-004
9. Rotate the printhead-open lever clockwise until it locks the printhead in place.
10. Set the printer to Tear-Off mode (for more information, see Print Mode on page 81).
11. Close the media door.
12. Press PAUSE to exit pause mode and enable printing.
The printer may perform a label calibration or feed a label, depending on your settings.
13. If desired, perform the CANCEL Self Test on page 142 to verify that your printer is able to
print.
Media loading in Tear-Off mode is complete.