Filter
Top Products
89
Printer Configuration and Adjustment
Changing Printer Settings
8/22/12 P1048261-004
Network Settings
Table 9 • Network Settings
IP Address View or Set the Printer’s IP Address
View and, if necessary, change the printer’s IP address.
Changes to this setting are saved only if IP PROTOCOL is set to PERMANENT. To
allow any saved changes to take effect, reset the print server (see Reset Network
on page 91).
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used: Wired: internal_wired.ip.addr
Wireless: ip.addr, wlan.ip.addr
Control panel menu item: IP ADDRESS on page 28
Printer web page:
View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings
Subnet Mask View or Set the Subnet Mask
View and, if necessary, change the subnet mask.
This menu item appears only if a wired or wireless print server is installed on your
printer. To save changes to this setting, set
IP PROTOCOL to PERMANENT, and then
reset the print server (see Reset Network on page 91).
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used: Wired: internal_wired.ip.netmask
Wireless: wlan.ip.netmask
Control panel menu item: SUBNET MASK on page 28
Printer web page:
View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings
Gateway View or Set the Default Gateway
View and, if necessary, change the default gateway.
This menu item appears only if a wired or wireless print server is installed on your
printer. To save changes to this setting, set
IP PROTOCOL to PERMANENT, and then
reset the print server (see Reset Network on page 91).
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used: Wired: internal_wired.ip.gateway
Wireless: wlan.ip.gateway
Control panel menu item: GATEWAY on page 28
Printer web page:
View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings