Zebra Technologies ZT210 Label Maker User Manual


 
Routine Maintenance
Cleaning Schedule and Procedures
122
P1048261-004 8/22/12
7. Using the swab from the Preventive Maintenance Kit (part number 47362), wipe along the
upper cutting surface (
1) and the cutter blade (2). In place of the Preventive Maintenance
Kit, you may use a clean swab dipped in a solution of isopropyl alcohol (minimum 90%)
and deionized water (maximum 10%). Allow the solvent to evaporate.
8.
1 2
Caution • The cutter blade is sharp. For operator safety, replace the cutter shield.
Replace the cutter shield (1) and secure it with the thumbscrew and lock washer that you
removed earlier (
2).
1
2