Filter
Top Products
10 ADSL X5 User's Guide
4
44
4
Click Installation Wizard.
5
55
5
Click ADSL X5 Modem to start the software installation, then
click Next when prompted.
6
66
6
When the installation is complete, click Finish, then click
Exit.
7
77
7
Close any applications that may be open, then remove the CD
from the CD-ROM drive.
8
88
8
Shut down the computer.
Congratulations! You have installed the software. Now, continue
with the next section, Installing the Hardware.
Step 2: Installing the Hardware
Windows users only: Be sure that you have already installed
the software BEFORE beginning this section. Software
installation is not required for Macintosh and Linux
computers.
1
11
1
Shut down your computer (if it is not shut down already).
!
For Windows users, this is the computer on which you just
installed the software.
!
For Macintosh or Linux users, this can be any one of the
computers that you plan to plug directly into the X5. If
you plan to use a network device (such as a wireless access
point, router, hub, or switch) you must connect at least
one of your computers directly to the modem.