Filter
Top Products
36 ADSL X5 User’s Guide
Status Buttons
The buttons in the Status group are typically used for maintenance
and troubleshooting.
The following table lists each button in the Status group and gives
a brief description of the settings you can specify.
Click a button below, then click the Help icon at the top of the
screen to open an online help topic about the page you are viewing.
This button… Opens a page that lets you…
ADSL Status
View in-depth information about your ADSL
connection.
PPP Status
Configure a Point-to-Point Protocol (PPP) to
enable communication between the X5 modem
and your Internet service provider.
TCP/IP Status
View information about the IP packets handled by
your modem.
EoA Status
Configure an Ethernet-over-ATM (EoA) interface
on the ADSL/Ethernet router, if one is needed to
communicate with your ISP.
ATM Status
Configure an Asynchronous Transfer Mode (ATM)
Virtual Circuit (VC) interface to enable the X5 to
communicate using the ATM protocol.
IPoA Status
Configure an Internet Protocol over ATM (IPoA)
interface on the ADSL/Ethernet router. An IPoA
interface can be used to exchange IP packets
over the ATM network, without using an
underlying Ethernet over ATM (EOA) connection.