Filter
Top Products
Chapter 1: Installation Instructions 11
Powering Up
To ensure that all the devices you just connected to the V3 install
correctly, you need to power up each device one at a time. Follow
these steps carefully.
1
11
1
Plug in the modem’s Power Supply, and turn on the
modem’s on/off switch if it has one.
Plug the modem’s power cube into a power outlet.
Wait for one-two minutes so that you are sure the modem has
completed its power up process before proceeding to Step 2.
2
22
2
Plug in the V3’s Power Supply.
Plug the included power cube into a power outlet and then
into the V3’s power (
PWR
) jack.
Wait for one-two minutes so that you are sure the V3 has
completed its power up process before proceeding to Step 3.
Note
: Use only the power cube shipped with the V3 or you
may cause damage to your hardware.
3
33
3
Turn the computer on.
If you are using USB
, a
Found New Hardware
box should
display, showing the progress of the installation. Follow the
prompts.
—
Windows XP users
: You may see
Hardware Installation
disclaimer boxes regarding Windows logo testing. You can
safely disregard these messages and click
Continue Anyway
.
—
Windows 2000 users
: You may see a
Digital Signature
Not Found
dialog box. You can safely disregard this message
and click
Yes
.
—Windows 98/Me users
: Restart your computer if you are
prompted to do so.