Filter
Top Products
40 Zoom V3 User’s Guide
For Mac OS 7.6.1 – 9.2.2:
From the
Apple
menu, choose
Control Panels
and then
TCP/IP
to display the
TCP/IP
Window. Under the
TCP/IP
tab, highlight
Manually
in the
Configure:
list box and enter the settings for
IP
Address, Subnet mask, Router address,
and
Name server
addr.
shown below,
unless you chose an IP address in Step 1
other than 10.2.2.16
, in which case you should enter the number
that you chose instead of 10.2.2.16. When done, close the Window
and you will be prompted to click
Save
. Then
continue with
Step 7.
IP address 10.2.2.16
Subnet mask 255.255.255.0
Router address
(V3’s LAN IP address)
10.2.2.2
Name server addr. 10.2.2.2
6
66
6
Red Hat Linux Users Only:
a
aa
a
Edit /etc/sysconfig/network-scripts/ifcfg-eth0 so
that it contains the following lines:
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
BROADCAST=10.2.2.255
NETMASK=255.255.255.0
IPADDR=10.2.2.16
GATEWAY=10.2.2.2
NETWORK=10.2.2.2
b
bb
b
Then edit or create /etc/resolv.conf so that it
contains the following line:
NAMESERVER=10.2.2.2
Note:
If you are using another version of Linux and you are unsure
how to enter this information, consult the help file or
documentation that came with your operating system.