Filter
Top Products
Chapter 1: Installation Instructions 21
•
From time to time, Zoom may release improved firmware.
This is available at
www.zoom.com
, along with upgrade
instructions. We recommend that you check this site
periodically for updates.
1.7 Changing the V3’s Password
& Resetting the Unit to Its
Default Settings
To change the V3’s Password, click the
Advanced Setup
icon at
the top of the
Zoom Configuration Manager
. Under the
Administration
heading, click
Admin Password
.
•
Type the new password, then retype it for verification
purposes.
•
Click
Save Changes
,
Write Settings to Flash and Reboot
,
and
Confirm
.
Note:
The password must be at least 8 characters. If you change your
password and then forget it, your only recourse is to reset it to the
default by performing a hardware system reset (see below).