Filter
Top Products
Chapter 2: Voice Over IP Settings 27
2
22
2
Under
Service Configuration
, click the
Auto Account
Configure
box to remove the checkmark.
3
33
3
Enter
the
User ID, Authorization ID, Password,
Domain/Realm,
and
SIP Proxy Address
in the
appropriate boxes. These five boxes
must
be filled in
correctly. Enter them carefully and check to make sure
they match the information given to you.
4
44
4
If you installed the V3 behind a router or your service
provider told you to enable
STUN
, click
Yes
to enable
STUN
. Then, enter the
STUN server
name and
port
number
. These should have been given to you by your
service provider.
5
55
5
Enter any additional information required by your
service provider.
If your provider gave you any other
information, enter it in the appropriate boxes.
6
66
6
You can now use
Select Ring &Tone by Country/Region
to decide what kind of ring and ring tone you would like for
your incoming VoIP calls. You can either choose to have your
ring and ring tone be the same as your normal phone ring,
slightly different, or completely different. We recommend that
you make the ring different from your normal ring so that you
can tell the difference between an incoming VoIP call and a
regular call.
To make
your incoming ring
the same as your normal
ring,
choose your country from the pulldown menu.
To make
your incoming ring slightly different
from your
normal ring, choose your country from the pulldown menu
and pick the “VoIP” option. This will give you the same tone
as your normal ring with a different ring pattern.
For a completely different ring tone
for your VoIP calls you
can choose any ring listed for any country.