Filter
Top Products
Chapter 2: Voice Over IP Settings 23
2
Voice Over IP Settings
If you purchased a V3 Model 5567, you do not need this
chapter. If you have another V3 model, please continue below.
2.1 Changing Your VoIP Settings
The V3 needs to be configured with specific information for
the VoIP service that you plan to use.
If you received the V3 from your service provider, it is likely
that it is preset for their VoIP service.
In most cases the service
provider will tell you that the unit has been preset. If you’re not
sure you can check by going to the
Advanced VoIP Setup
page
(Double-click the
Zoom V3
icon on your desktop, then the
Voice
over IP
button on the opening page, then the
Advanced VoIP
Setup
button.) If the
User ID
box is filled in, your V3 is preset;
you can now refer to
Section
1.3 Tips for Making VoIP Calls
on page 18 or
Section
2.2 Call Forwarding and Call Waiting
on page 28
. If your V3 is not preset, continue below.
If Your Unit Is Not Preset for VoIP
There are two ways to configure the V3 for VoIP.
Both require
that you enter specific information provided to you by your service
provider.
Some service providers use
Auto Account Configuration
. If your
service provider gave you a
Server Address
, they are using Auto
Account Configuration. Go to Auto Account Configuration on
page 24.