Filter
Top Products
46 Zoom V3 User’s Guide
For Windows 2000:
From the desktop click the
Start
button,
point to
Settings
and then
Network and Dial-up Connections
.
Then right-click (NOT left-click)
Local Area Connection
,
select
Properties
, highlight your NIC card’s
TCP/IP
entry (it should
start with
TCP/IP
and have the characters
10/100
,
NIC
, or
Ether
in it – and not have the words
AOL
,
Dial-up
, or
Adapter
). Click
Properties
to display the Windows
TCP/IP Properties
dialog
box.
For Windows 98 and Me:
From the desktop click the
Start
button, then point to
Settings
and then
Control Panel.
Double-
click the
Network
icon to display the
Network
configuration
screen. Highlight your NIC card’s
TCP/IP
entry (it should start
with
TCP/IP
and have the characters
10/100
,
NIC
, or
Ether
in it
– and not have the words
AOL
,
Dial-up
, or
Adapter
). Click
Properties
to display the Windows
TCP/IP Properties
dialog
box.
3
33
3
Windows Users Only: Enter the IP Settings.
For Windows 2000 and XP:
Click the
Use the following IP address
and
Use the following
DNS server addresses
buttons so that a black dot appears. Then
enter the settings for
IP address
,
Subnet mask
,
Default
gateway
, and
Preferred DNS server
. Most users can copy the
information exactly as it is shown in the chart below. However,
if
you chose an IP address in Step 1 other than 10.2.2.16
, enter
the number that you chose instead of 10.2.2.16. When done, click
OK
and
continue with Step 6.
IP address 10.2.2.16
Subnet mask 255.255.255.0
Default gateway (V3’s LAN IP address) 10.2.2.2
Preferred DNS server 10.2.2.2
For Windows 98 and Me:
Click
Specify an IP Address
and enter the settings for
IP
Address
and
Subnet Mask
shown below,
unless you chose an
IP address in Step 1 other than 10.2.2.16
, in which case you
should enter the number that you chose instead of 10.2.2.16.