Filter
Top Products
72 Zoom V3 User’s Guide
If you have a WAN IP address, skip to page 72.
If you don’t have a WAN IP address and you are using a
Cable Modem or a DSL PPPoA or 1483 Modem, your
next step should be to do a Release/Renew operation.
1
11
1
Go to the V3’s
Advanced Setup
page and click
WAN
DHCP Status
.
2
22
2 Select
Release
and click
Save Changes
.
3
33
3 Select
Renew
and click
Save Changes
.
4
44
4
Go to your Web browser
(i.e., Internet Explorer or
Netscape Navigator) and
try to connect
to a familiar Web
address. If you are unsuccessful, check to see if you have a
WAN IP address (see page 71). If you do not, you should
contact Zoom Technical Support.
If you have a WAN IP address, but can’t connect to the
Internet, make sure that:
Your Ethernet or USB cable connections are okay.
Check that the appropriate V3 front panel light is lit (
LAN 1,
2, 3, or 4
or
USB
). This will confirm that the connection is
good.
Your WAN connection is okay.
Check that the V3 front panel
LINK
light is lit. This will
confirm that the connection to your cable or DSL modem is
good.
Your computer’s TCP/IP properties are correct.
Macintosh users:
TCP/IP instructions are on page 68.
Linux users:
TCP/IP instructions are on page 69.
Windows users: