Filter
Top Products
74 Zoom V3 User’s Guide
3
33
3
If you are using a static IP address, check that your
IP settings are okay.
For Windows 2000 and XP:
Click the
Use the following IP address
and
Use the
following DNS server addresses
buttons so that a black dot
appears. Then enter the settings for
IP address
,
Subnet
mask
,
Default gateway
, and
Preferred DNS server
assigned
by your provider.
For Windows 98 and Me:
Click
Specify an IP address
and enter the settings for
IP
Address
and
Subnet Mask
as assigned by your provider.
Now click the
DNS Configuration
tab. Then click
Enable
DNS
. Enter any name (i.e., your name, the words “My
Computer”, a favorite word, or any other letters or numbers)
in the box labeled
Host:
. A
Host:
name is required.
Fill in the
DNS Server Search Order
box with the number
10.2.2.2
, click
Add,
and then click the
Gateway
tab near the
top of the page. Fill in the
New gateway:
box with the
number
10.2.2.2
, and click
Add
.
Your service provider’s broadband connection is
functioning properly.
Unplug the Ethernet cable that you plugged into the V3’s
WAN
jack (the one that you unplugged from your PC). Plug it
back into the PC and see if you are able to connect to the
Internet. If you are not able to connect, contact your service
provider.
•
Your service provider’s broadband connection is functioning
properly by placing a call to customer support.
I type http://10.2.2.2 into my Web browser’s address bar, but
the V3’s Network Password box won’t open so I can’t
communicate with the V3.