Filter
Top Products
42 Zoom V3 User’s Guide
Enter the information shown below now on the Virtual Server
Configuration page.
Public Port
Inbound port from the Internet that you want
to open. This is the port number, or one of
the port numbers, that you got from your
gaming manual or the web site at
www.practicallynetworked.com
Private Port
Enter the same port number that you
entered in the Public Port field above.
(Technically, the Private Port is the inbound
port from the V3 that you want to open to the
LAN side.)
Note: You cannot leave the Private Port field
blank.
Port Type
The default is TCP. Some games use both
TCP and UDP. If your game uses both port
types, you will have to create two Virtual
Server entries for each port you want to
open. Once you will have to enter the Public
Port, Private Port, and Host IP address, and
select TCP, and then you will have to fill in
the same fields again and select UDP.
Host IP Address
Fixed IP address of the host computer—
this
is the same IP address that you chose in
Step 2 and entered in Step 4,
probably
10.2.2.16.