Filter
Top Products
Prestige 1600 Universal Access Concentrator
RADIUS Support
12-6
The following table describes the accounting attributes mentioned in the above example.
Accounting attributes may vary depending on the external server.
Table 12-3 Accounting Attributes
Field Description
Acct-Status-Type Account Status Type has four values: Accounting On,
Accounting Off, Start and Stop.
An Accounting On message is sent when the Prestige starts the
RADIUS Accounting service. An Accounting Off message is sent
when the Prestige ends the service.
A Start message is sent when a user session begins. A Stop
message is sent when the session ends.
Acct-Session-Id Account Session Id is a unique number assigned to each
session to make it easy to match the Start and Stop records in a
detail file, and to eliminate duplicate records.
Note that in the above example this value matches in the Start
and Stop record, indicating that these records correspond to the
same session.
User-Name Specifies the user name.
NAS-Port Refers to the Network Access Server (NAS), i.e., the Prestige,
port used in the connection.
NAS-Port-DNIS Refers to the called party’s directory number.
Caller Id Refers to the dial-in user’s directory number.
Acct-Input-Octets This is the number of inbound bytes.
Acct-Output-Octets This is the number of outbound bytes.
Acct-Session-Time This is the length of the session in seconds.