Filter
Top Products
Prestige 1600 Universal Access Concentrator
System Information and Maintenance
14-9
14.5 Boot Module Commands
Prestige boot module commands are shown below. For ATBAx, x denotes the number preceding the colon to give
the speed following the colon in the list of numbers that follows; e.g. ATBA3 will give a baud of 9.6 Kbps. ATSE
displays the seed that is used to generate a password to turn on the debug flag in the firmware. The ATSH
command shows product related information such as boot module version, vendor name, product model, RAS code
revision, etc.
Figure 14-12 Boot Module Commands
14.6 Command Interpreter Mode
This option allows you to enter the command line interpreter mode. A CLI/CI (Command Line Interface) is a user
interface to a computer's operating system or an application program in which the user responds to a visual prompt
by typing in a command on a specified line, receives a response back from the system, and then enters another
command, and so forth.
The list of valid commands can be found by typing help or ? at the command prompt. To exit the CI mode and
return to the menu mode, type exit.
======= Debug Command Listing =======
athe
======= Debug Command Listing =======
AT just answer OK
ATHE print help
ATBAx change baudrate. 1:38.4k, 2:19.2k, 3:9.6k
4:57.6k 5:115.2k
ATENx(,y) set BootExtension Debug Flag (y=password)
ATSE show the seed of password generator
ATTI(h,m,s) change system time to hour:min:sec or show
current time
ATDA(y,m,d) change system date to year/month/day or show
current date
ATDS dump RAS stack
ATDT dump Boot Module Common Area
ATDUx,y dump memory contents from address x for
length y
ATRBx display the 8-bit value of address x
ATRBx display the 8-bit value of address x
ATRWx display the 16-bit value of address x
ATRLx display the 32-bit value of address x
ATGOx run program at addr x or boot ZyNOS
ATGR boot ZyNOS
ATGT run Hardware Test Program
ATRTw,x,y(,z) RAM Test level w, from address x to y (z
iterations)
ATCB copy from FLASH ROM to working buffer
ATSH dump manufacturer related data in ROM
ATDOx,y download from address x for length y to PC
via XMODEM
ATTD download configuration to PC via XMODEM
< press any key to continue >
ATUR upload RAS code to flash ROM
ATUR3 upload RAS configuration file
ATLC upload RAS configuration file
ATLOa,b,c,d Int/Trap Log Cmd
ATGM boot ZyNOS in main block
ATGB boot ZyNOS in backup block
ATUM upload RAS code to main block
ATUB upload RAS code to backup block
ATSW switch main block and backup block