Filter
Top Products
Prestige 1600 Universal Access Concentrator
10-4
Filter Configuration
Figure 10-4 Menu 21.1 - Filter Rules Summary
10.3.1 Filter Rules Summary Menu
These screens show a summary of the existing rules in an example filter set. The following tables contain a brief
description of the abbreviations used in Menu 21.1 and Menu 21.2.
Table 10-1 Abbreviations Used in the Filter Rules Summary Menu
Abbreviations Description Display
# Refers to the filter rule number (1-6).
A Refers to Active. [Y] means the filter rule is
active.
[N] means the filter rule is
inactive.
Type Refers to the type of filter rule.
This shows IP for TCP/IP, and Device
[IP] for TCP/IP
[Dev] for Device
Filter Rules The filter rule parameters are
displayed here (see below).
M Refers to More.
[Y] means an action can not yet be
taken as there are more rules to check,
which are concatenated with the
present rule to form a rule chain.
When the rule chain is complete an
action can be taken.
[N] means you can now specify an
action to be taken i.e., forward the
packet, drop the packet or check the
next rule. For the latter, the next rule is
independent of the rule just checked.
If More is Yes, then Action Matched
and Action Not Matched will be N/A.
[Y] means there are more
rules to check.
[N] means there are no more
rules to check.
m Refers to Action Matched. [F] means to forward the
Menu 21.1 - Filter Rules Summary
# A Type Filter Rules M m n
- - ---- -------------------------------------------- ------ - - -
1 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=137 N D N
2 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=138 N D N
3 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=139 N D N
4 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=137 N D N
5 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=138 N D N
6 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=139 N D F
Enter Filter Rule Number (1-6) to Configure: 1
Edit Comments= NetBIOS_WAN
Press ENTER to Confirm or ESC to Cancel:
Enter Filter Rule Number (1-6) to Configure: