Filter
Top Products
Prestige 1600 Universal Access Concentrator
Initial Setup
3-7
Figure 3-7 Menu 1 - General Setup (Primary)
When you configure the Prestige as a secondary or standalone model (Configuration Type field), you will see the
following screen.
Figure 3-8 Menu 1 - General Setup (Secondary/Standalone)
The Menu 1 - General Setup fields are explained in the next table.
Table 3-3 General Setup Fields
Field Description Example
System Name Choose a descriptive name for identification purposes. This name
can be up to 30 alphanumeric characters long. Spaces are not
allowed, but dashes “-” and underscores "_" are accepted. This
name can be retrieved remotely via SNMP and will be displayed
up to the first 9 characters at the prompt in the Command Mode.
MyPrimary
Note: Once you have configured the System Name, you can see it displayed (up to the first 9
characters) in the Main Menu within brackets next to "Prestige 1600 Main Menu”.
Configuration
Type
Secondary ID
You can configure the P1600 primary as only Primary. For P1600
Secondary choose Secondary or Standalone.
State the ID of the P1600 secondary. You may have up to four
secondaries with one primary.
Primary
1, 2, 3 or 4
Location
(optional)
Enter the geographic location (up to 31 characters) of your
Prestige 1600.
Hsinchu
Contact
Person's Name
(optional)
Enter the name (up to 30 characters) of the person in charge of
this Prestige 1600.
JohnDoe
Primary DNS
Server
Enter the IP addresses of the DNS servers. The DNS servers are passed
to the DHCP clients along with the IP address and the subnet mask.
Menu 1 - General Setup
System Name= MySecondary
Configuration Type= Secondary
Secondary ID= 1
Location=
Contact Person's Name= MaryDoe
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
Menu 1 - General Setup
System Name= MyPrimary
Configuration Type= Primary
Secondary ID= N/A
Location=
Contact Person's Name= JohnDoe
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel: