Filter
Top Products
Prestige 1600 Universal Access Concentrator
System Information and Maintenance
14-1
Chapter 14
System Information and Maintenance
This chapter provides information about the diagnostic tools that help you maintain your Prestige.
The diagnostic tools include updates on system status, port status, log and trace capabilities and upgrades for the
system software. This chapter describes how to use these tools in detail. Information about upgrades is provided in
the Configuration & Firmware Maintenance chapter.
Select menu 24 in the main menu to open Menu 24 - System Maintenance, as shown below.
Figure 14-1 Menu 24 - System Maintenance
14.1 System Status
The first selection, System Status, gives you the status and statistics of the ports, as shown below. System Status is
a tool that can be used to monitor your Prestige. Specifically, it gives you information on the WAN port and the
network module status, number of packets sent and number of packets received.
To get to the System Status, select number 24 to go to Menu 24 - System Maintenance. From this menu, select
number 1, System Status.
Depending on the System Type configuration in the Menu 1 - General Setup, you can see the respective system
type status in Menu 24.1 - System Maintenance - Status. For example, if you chose Primary Configuration
Type with 2 IDSL network modules installed in slots 1 and 2, you will see the following figure. It should be noted
that these fields are READ-ONLY and are meant to be used for diagnostic purposes.
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8.
Command Interpreter Mode
9.
Time and Date Setting
Enter Menu Selection Number: