Filter
Top Products
Prestige 1600 Universal Access Concentrator
Filter Configuration
10-11
Field Description Option
Both - All packets will be logged. Both
Action
Matched
Select the action for a matching packet.
Check Next
Rule
Forward
Drop
Action Not
Matched
Select the action for a packet not matching the rule.
Check Next
Rule
Forward
Drop
Once you have completed filling in Menu 21.1.1 - Device Filter Rule, press [ENTER]
at the message “Press ENTER to Confirm” to save your configuration, or press [ESC]
to cancel. This data will now be displayed on Menu 21.1 - Filter Rules Summary.
10.6 Applying a Filter
This section shows you where to apply the filter(s) after you design it (them).
10.6.1 Ethernet traffic
You seldom need to filter Ethernet traffic; however, the filter sets may be useful to block certain packets, reducing
traffic and preventing security breaches. Go to Menu 3.1 (shown below) and enter the number(s) of the filter set(s)
that you want to apply as appropriate. You can choose up to four filter sets (from twelve) by entering their numbers
separated by commas, e.g., 3, 4, 6, 11.
Figure 10-9 Filtering Ethernet Traffic
Menu 3.1 - General Ethernet Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel: