Filter
Top Products
Chapter 26 Troubleshooting
ADSL Series User’s Guide
248
4 Turn the ZyXEL Device off and on.
5 If the problem continues, contact the vendor.
26.3 ZyXEL Device Access and Login
I forgot the IP address for the ZyXEL Device.
1 The default IP address is 192.168.1.1.
2 If you changed the IP address and have forgotten it, you might get the IP address of the ZyXEL
Device by looking up the IP address of the default gateway for your computer. To do this in most
Windows computers, click Start > Run, enter cmd, and then enter ipconfig. The IP address of the
Default Gateway might be the IP address of the ZyXEL Device (it depends on the network), so
enter this IP address in your Internet browser.
3 If this does not work, you have to reset the device to its factory defaults. See Section 1.6 on page
25.
I forgot the password.
1 The default admin and user password is 1234.
2 If this does not work, you have to reset the device to its factory defaults. See Section 1.6 on page
25.
I cannot see or access the Login screen in the web configurator.
1 Make sure you are using the correct IP address.
• The default IP address is 192.168.1.1.
• If you changed the IP address - see page 145, use the new IP address.
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for I
forgot the IP address for the ZyXEL Device.
2 Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
Start Guide.
3 Make sure your Internet browser does not block pop-up windows and has JavaScript and Java
enabled. See Appendix C on page 303.