Filter
Top Products
Chapter 27 Product Specifications
ADSL Series User’s Guide
260
Wall-mounting Instructions
Do the following to hang your ZyXEL Device on a wall.
Note: See Table 87 on page 256 for the size of screws to use and how far apart to place
them.
1 Locate a high position on a wall that is free of obstructions. Use a sturdy wall.
2 Drill two holes for the screws. Make sure the distance between the centers of the holes matches
what is listed in the product specifications appendix.
Be careful to avoid damaging pipes or cables located inside the wall
when drilling holes for the screws.
3 Do not screw the screws all the way into the wall. Leave a small gap of about 0.5 cm between the
heads of the screws and the wall.
4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of the ZyXEL
Device with the connection cables.
IEEE 802.11 Also known by the brand Wi-Fi, denotes a set of Wireless LAN/WLAN
standards developed by working group 11 of the IEEE LAN/MAN
Standards Committee (IEEE 802)
IEEE 802.11b Uses the 2.4 gigahertz (GHz) band
IEEE 802.11g Uses the 2.4 gigahertz (GHz) band
IEEE 802.11n Uses the 2.4 gigahertz (GHz) band
IEEE 802.11d Standard for Local and Metropolitan Area Networks: Media Access
Control (MAC) Bridges
802.1x Port Based Network Access Control
IEEE 802.11e QoS IEEE 802.11 e Wireless LAN for Quality of Service
ANSI T1.413, Issue 2 Asymmetric Digital Subscriber Line (ADSL) standard
G dmt(G.992.1) G.992.1 Asymmetrical Digital Subscriber Line (ADSL) Transceivers
ITU G.992.1 (G.DMT) ITU standard for ADSL using discrete multitone modulation
ITU G.992.2 (G. Lite) ITU standard for ADSL using discrete multitone modulation
ITU G.992.3 (G.dmt.bis) ITU standard (also referred to as ADSL2) that extends the capability of
basic ADSL in data rates
ITU G.992.4 (G.lite.bis) ITU standard (also referred to as ADSL2) that extends the capability of
basic ADSL in data rates
ITU G.992.5 (ADSL2+) ITU standard (also referred to as ADSL2+) that extends the capability of
basic ADSL by doubling the number of downstream bits
RFC 2383 ST2+ over ATM Protocol Specification - UNI 3.1 Version
TR-069 TR-069 DSL Forum Standard for CPE Wan Management
TR-064 DSL Forum LAN-Side DSL CPE Configuration
1.363.5 Compliant AAL5 SAR (Segmentation And Re-assembly)
Table 90 Standards Supported (continued)
STANDARD DESCRIPTION