Filter
Top Products
Chapter 2 Introducing the Web Configurator
ADSL Series User’s Guide
37
2.3.9 Wireless Security
Use this screen to configure security for your the Wireless LAN. You can enter the SSID and select
the wireless security mode in the following screen.
Figure 15 Wireless Security
The following table describes the general wireless LAN labels in this screen.
Table 6 Wireless Security
LABEL DESCRIPTION
Wireless
Network Name
(SSID)
(Service Set IDentity) The SSID identifies the Service Set with which a wireless station is
associated. Wireless stations associating to the access point (AP) must have the same
SSID. Enter a descriptive name (up to 32 keyboard characters) for the wireless LAN.
Security Mode Select Basic or More Secure to add security on this wireless network. The wireless clients
which want to associate to this network must have same wireless security settings as the
ZyXEL Device. When you select to use a security, additional options appears in this screen.
Or you can select No Security to allow any client to associate this network without any
data encryption or authentication.
See Section 6.2 on page 107 for more details about wireless security modes.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to close this screen.
WPS Click this to configure the WPS screen.
You can transfer the wireless settings configured here (Wireless Security screen) to
another wireless device that supports WPS.