Filter
Top Products
Chapter 2 Introducing the Web Configurator
ADSL Series User’s Guide
34
response from the gateway. The same rule applies to the line connecting the gateway to the
Internet.
You can also view the devices (represented by icons indicating the kind of network device)
connected to the ZyXEL Device, including those connecting wirelessly. Right-click on the ZyXEL
Device icon to refresh the network map and go to the Wizard. Right click on the other icons to view
information about the device.
2.3.5 Control Panel
The features configurable in User Mode are shown in the Control Panel.
Figure 11 Control Panel
Switch ON to enable the feature. Otherwise, switch OFF. If the feature is turned on, the green light
flashes. If it is turned off, the red light flashes.
Additionally, click the feature to open a screen where you can edit its settings.
The following table describes the labels in this screen.
2.3.6 Power Saving
Use this screen to set the day of the week and time of the day when your wireless LAN is turned on
and off. Wireless LAN scheduling is disabled by default.
Table 3 Control Panel
ITEM DESCRIPTION
Power Saving Click this to schedule the wireless feature of the ZyXEL Device.
Disabling the wireless function helps lower the energy consumption of the ZyXEL
Device.
Switch ON to apply wireless scheduling. Otherwise, switch OFF.
Refer to Section 2.3.6 on page 34 to see this screen.
Content Filter Click this to restrict access to certain websites, based on keywords contained in
URLs, to which you do not want users in your network to open.
Switch ON to apply website filtering. Otherwise, switch OFF.
Refer to Section 2.3.7 on page 35 to see this screen.
Firewall Switch ON to ensure that your network is protected from Denial of Service (DoS)
attacks. Otherwise, switch OFF.
Refer to Section 2.3.8 on page 36 to see this screen.
Wireless Security Click this to configure the wireless security, such as SSID, security mode and
WPS key on your ZyXEL Device.
Refer to Section 2.3.9 on page 37 to see this screen.
Media Server Switch ON to enable the media server on your ZyXEL Device. Otherwise, switch
OFF.
Refer to Section 2.3.11 on page 38 to see this screen.