Filter
Top Products
ADSL Series User’s Guide 41
CHAPTER 3
Tutorials
3.1 Overview
This chapter contains the following tutorials:
• Setting Up Your DSL Connection
• How to Set up a Wireless Network
• Setting Up NAT Port Forwarding to Allow Access to Network Servers from the Internet
• Using the File Sharing Feature
• Using the Print Server Feature
• Configuring the MAC Address Filter for Restricting Wireless Internet Access
• Configuring Static Route for Routing to Another Network
• Configuring QoS Queue and Class Setup
• Access the ADSL Device Using DDNS
3.2 Setting Up Your DSL Connection
This tutorial shows you how to set up your ADSL settings for Internet connection using the Web
Configurator. If you connect to the Internet through a DSL connection, connect the ADSL Device
properly. Refer to the Quick Start Guide for details on the ADSL Device’s hardware connections.
PPPoE Account Configuration
1 Click Network Setting > Broadband to open the screen shown below. Make sure you select
ADSL in the Type field.
Note: If the type is EtherWAN, select ADSL and click the Switch WAN Interface
button. The ADSL Device will switch to ADSL mode after it restarts.