Filter
Top Products
Chapter 4 Connection Status and System Info Screens
ADSL Series User’s Guide
86
Status This field indicates whether or not the ZyXEL Device is using the interface.
For the DSL interface, this field displays Down (line is down), Up (line is up or
connected), Initializing (line is initializing), Establishing Link (line is establishing a
link) if you're using Ethernet encapsulation and Down (line is down), Up (line is up or
connected), Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop (dropping a
call) if you're using PPPoE encapsulation.
For the LAN interface, this field displays Up when the ZyXEL Device is connected
through an Ethernet cable to a computer or a HUB. It displays Down when the ZyXEL
Device’s Ethernet port is disconnected.
For the WLAN interface, it displays Active when WLAN is enabled or InActive when
WLAN is disabled.
Rate For the LAN interface, this displays the port speed.
For the WAN interface, this displays the DSL link rate downstream and upstream.
For the DSL interface, it displays the downstream and upstream transmission rate.
For the WLAN interface, it displays the maximum transmission rate when WLAN is
enabled or N/A when WLAN is disabled.
System Status
DSL Up Time This field displays how long the DSL connection has been active
System Up Time This field displays how long the ZyXEL Device has been running since it last started up.
The ZyXEL Device starts up when you plug it in, when you restart it (Maintenance >
Reboot), or when you reset it (see Chapter 1 on page 25).
Current Date/
Time
This field displays the current date and time in the ZyXEL Device. You can change this in
Maintenance > Time Setting.
System Resource
CPU Usage This field displays what percentage of the ZyXEL Device’s processing ability is currently
used. When this percentage is close to 100%, the ZyXEL Device is running at full load,
and the throughput is not going to improve anymore. If you want some applications to
have more throughput, you should turn off other applications.
Memory Usage This field displays what percentage of the ZyXEL Device’s memory is currently used.
Usually, this percentage should not increase much. If memory usage does get close to
100% and remains like that for a high period of time, the ZyXEL Device may become
unstable and you should restart it. See Chapter 24 on page 241, or turn off the device
(unplug the power) for a few seconds.
Power Usage This field displays the electric power the device is using.
USB Status
Type This shows the type of device connected to the ZyXEL Device.
Status This field shows Available if the USB device is currently active. It shows N/A if there
are no device connected to the ZyXEL Device or the connected device is not working.
LABEL DESCRIPTION