Filter
Top Products
Chapter 3 Tutorials
ADSL Series User’s Guide
44
Try to connect to a website, such as “www.zyxel.com” to see if you have correctly set up your
Internet connection. Be sure to contact your service provider for any information you need to
configure the WAN screens.
3.3 How to Set up a Wireless Network
This section gives you examples of how to connect the Internet wirelessly through the ADSL Device.
A wireless network card or USB wireless adapter is referred to as the “wireless client” here.
In the following diagram, the wireless client is labeled C and the ADSL Device is labeled A.
Wireless LAN Setup
Note: This section shows how to set up the wireless client using two methods: using the
Microsoft Windows utility and the WPS PIN method. Refer to the Quick Start Guide
if the wireless client has a WPS button and you wish to connect wirelessly using
another WPS button method (Push Button Configuration).
3.3.1 Example Parameters
The following parameters will be used to configure the ADSL Device.
3.3.2 Configuring the ADSL Device
Follow the steps below to configure the wireless settings on your ADSL Device.
1 Open the Network Setting > Wireless > General screen in the ADSL Device’s web configurator.
C
A
SSID SSID_Example3
802.11 mode 802.11b/g
Channel auto
Security WPA-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)