Configuring Emergency Services 137
3 In the Network IP heading, click the IP address you want to edit.
The Edit IP Range page appears.
4 In the IP Address field, enter the IP network address that identifies the
range addresses you want to include in this ERL.
5 In the Subnet Mask field, enter the subnet mask for this IP address range.
6 Click Save.
The IP Ranges page refreshes showing the new IP address range.
Deleting IP Addresses
from an ERL
To delete an IP address range from an ERL.
1 In the USERS menu, click Emergency Services.
The Emergency Defaults and Emergency Services page appears.
2 In the Location Settings column, click IP Ranges for the ERL you want to
edit.
The IP Ranges page appears.
3 Enter a check mark in the check box preceding the IP address you want to
delete.
4 Click Delete Selected.
A pop-up window appears prompting you to confirm the IP address
delete action.
5 Click OK.
The IP Ranges page refreshes verifying the IP address(es) were deleted.
Editing Emergency
Numbers
To edit an Emergency Number for the ERL.
CAUTION: If Emergency service settings or emergency lines are changed,
(for example, the gateway IP address or emergency digits) they will not
take effect until the telephones are power cycled. A simple logout/login
of the telephone is not adequate.
1 In the USERS menu, click Emergency Services.
The Emergency Defaults and Emergency Services page appears.
2 From the Location Settings column, click Emergency Numbers for the ERL
you want to configure.
The Emergency Numbers page appears.
