NEC Electronics America VT 300 Series Manual

A SERVICE OF

next previous

Installing Options 4-23

Installing the Celeron or Pentium III processor

A

– Processor Cartridge

C

– Slot 1 Connector

B

– Retention Mechanism

D

– Key

4.

If the processor cartridge has an attached cooling fan,

plug the fan cable into its connector (CPUFAN) on the

system board.

5.

Set the processor jumpers on the system board for the

processor type that you installed (see “Processor Jumper

Settings” in Chapter 3).

6.

Replace the AGP graphics board and any expansion

boards you might have removed (see “Installing an

Expansion Board” and “Installing the AGP Board” later

in this chapter).

7.

Set the processor jumpers on the system board for the

processor type that you installed (see “Processor Jumper

Settings” in Chapter 3).