5-8 Solving System Problems
The drive plays music CDs but the sound is not
heard. However, .WAV and .MIDI sounds can be heard
when played.
Check that the cable connecting from the rear of the drive
to the system board CD audio connector is in place and
secure.
Check the CD Audio volume setting.
Speaker Problems
Check the following problems to see the possible cause and
solution.
No sound from the speakers.
Check that the speaker power is on. Verify that all speaker
cable connections are correct and secure.
Check that the speaker’s AC adapter is plugged into a
properly grounded AC power outlet.
Speaker volume is too low.
Adjust the volume control on the speaker. If the volume is
still too low, adjust the volume through the system
software. See your Windows Multimedia online help.
Sound is only coming from one speaker.
Balance the speaker output by adjusting the balance in the
sound software. See your Windows Multimedia online
help.
