Installing Options 4-17
4. If you are installing a DIMM, see “Installing a DIMM” in
the next section.
5. Replace the left side cover (see “Replacing the Left Side
Cover” earlier in this chapter).
Installing a DIMM
Use the following steps to install a memory module.
1. Remove the left side cover (see “Removing the Left Side
Cover” earlier in this chapter).
2. If you need to remove a currently installed DIMM, see
“Removing a DIMM” earlier in this chapter.
!
CAUTION
Before you install a DIMM, reduce static
discharge by touching the chassis.
3. Align the notches on the new DIMM with the keys in an
empty memory socket (see the following figure).
If your memory configuration requires only one DIMM,
install it in DIMM socket 1 (next to the processor).
4. Press the DIMM firmly into the socket.
5. Make sure the locking clips at both ends of the DIMM
click closed.
