3-14 Configuring the System
Advanced Menu - Power Management Setup
Menu Item Settings (default is bold)
Power Management/APM
Enabled
, Disabled
The Enabled setting enables Power
Management and Advanced Power
Management (APM).
Video Power Down Mode Disabled, Standby,
Suspend
Specifies the power conserving state that the
VESA VGA video subsystem enters after a
specified period of display inactivity has
expired.
Hard Disk Power Down Mode Disabled,
Standby
, Suspend
Specifies the power conserving state that the
hard disk drive enters after a specified period
of inactivity has expired.
Standby Time Out (Minutes)
Disabled
, 1, 2, 4, 8, 10, 20, 30, 40, 50, 60
Specifies the length of time of system
inactivity while in full power on state before
entering Standby state.
Suspend Time Out (Minutes)
Disabled
, 1, 2, 4, 8, 10, 20, 30, 40, 50, 60
Specifies the length of time of system
inactivity while in Standby state before
entering Suspend power state.
Power Button Function
Sleep/Suspend
Sleep/Suspend sets the power switch for
Suspend (Sleep) mode. With power on,
pressing the switch once places the system in
sleep mode. Pressing and holding the switch
in for 4 seconds turns power off.
