A SERVICE OF

logo

Open as PDF
next previous
4-16 Installing Options
Removing a DIMM
If your memory configuration requires the removal of a
DIMM module, use the following steps.
!
CAUTION
Before opening the computer and before
handling boards or memory modules, reduce
static discharge by touching the chassis.
1.
Remove the left side cover (see “Removing the Left Side
Cover” earlier in this Chapter).
2.
Locate the memory upgrade sockets on the system board
(see the figure “System board sockets and connectors”
earlier in this chapter).
3.
Eject a DIMM by pressing the plastic clips at the outer
edges of the socket away from the memory module.
Removing a DIMM
A
– Plastic Clip