A SERVICE OF

logo

Open as PDF
next previous
4-28 Installing Options
Installing the Pentium II processor
A
– Locking Tabs
D
– System Board
B
– Processor Cartridge
E
– Bottom Bar
C
– Retention Mechanism
F
– Top Bar
6.
Set the processor jumpers on the system board for the
processor type that you installed (see “Processor Jumper
Settings” in Chapter 3).
7.
Replace the AGP graphics board and any expansion
boards that you might have removed (see “Installing an
Expansion Board” and “Installing the AGP Board” later
in this chapter).
8.
Install the left side cover (see “Replacing the Left Side
Cover” earlier in this chapter).