3-12 Configuring the System
Advanced Menu - Advanced CMOS Setup
Menu Item Settings (default is bold)
Event Log Capacity Status only. Press
Enter
to view.
Event Log Validity Status only. Press
Enter
to view.
View DMI Event Log Status only. Press
Enter
to view.
Clear all DMI Events Logs
No
, Yes
Selecting No prevents clearing out the DMI
events logs.
Event Logging
Enabled
, Disabled
Selecting Enabled permits event logging.
ECC Event Logging
Enabled
, Disabled
Selecting Enabled permits ECC event
logging.
Quick Boot
Enabled
, Disabled
When Enabled, the BIOS does not test
system memory above 1 MB or wait for ready
signals, allowing a quick boot.
1
st
Boot Device Disabled,
IDE-0
, IDE-1, IDE-2, IDE-3, Floppy,
LS-120, ATAPI Zip, CDROM, SCSI, Network
Sets the hard drive as the first boot device.
2
nd
Boot Device Disabled, IDE-0, IDE-1, IDE-2, IDE-3, Floppy,
LS-120, ATAPI Zip,
CDROM
, SCSI, Network
Sets the CD-ROM drive as the second boot
device.
3
rd
Boot Device Disabled, IDE-0, IDE-1, IDE-2, IDE-3,
Floppy
, LS-120, ATAPI Zip, CDROM, SCSI,
Network
Sets the diskette drive as the third boot
device.
