2-4 Setting Up the System
If a problem occurs, a series of beeps may sound. If this
happens repeatedly after powering on, power off the system
and turn to Chapter 5, “Solving System Problems.” The
chapter provides helpful hints for solving system problems.
Note
:
If the system displays a message
indicating that system settings have changed,
run the BIOS Setup utility (see Chapter 3,
“Configuring the System”).
On systems loaded with the Windows NT
®
4.0 operating
system, press
Ctrl Alt Del
when prompted on-screen to do so.
The log-on box appears for entering a password.
Shutdown
Follow these steps to power off your computer.
1.
Save your work and exit all open application programs.
2.
Make sure that the hard drive, diskette drive, and any
other drives are not in use. A lit device lamp indicates that
the device is in use.
!
CAUTION
Wait until a program is finished running before
powering off the system.
Unless absolutely necessary, never power off the
system when the system power lamp is amber or
when either the hard drive lamp, diskette drive,
or other device lamp is lit. Information on the
device might be lost or damaged.
