Configuring the System 3-9
Main Menu Items
Menu Item Settings (default is bold)
System Time Set system time in this field. Press
Tab
or
Enter
to move between hour, minute, and
second fields.
Example:
09:30:00
Floppy Drive A: Disabled
360 KB 5 1/4"
1.2 MB 5 1/4"
720 KB 3 1/2"
1.44/1.25 MB 3 1/2"
2.88 MB 3 1/2"
Floppy Drive B Not Installed
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Device type,
Auto
Device type,
Auto
Device type,
Auto
Device type,
Auto
Each device menu item displays the Hard
drive or CD-ROM identifier if a device is
installed.
If you install a hard drive that does not feature
auto IDE type detection or your IDE hard
drive was formatted on another system with
parameters different from those reported by
the drive, enter a parameter for each of the
fields in the device submenu.
Bring up a device submenu by pressing
Enter
. The submenus include Type,
Cylinders, Heads, Sectors, LBA Mode, Block
Mode, Fast Programmed I/O Modes, and
32-Bit Transfer Mode. Each mode is briefly
described in the following.
