Filter
Top Products
101
■ 10M — Indicates the port is currently operating at 10 Mbps.
■ 100M — Indicates the port is currently operating at 100 Mbps.
■ 1000M — Indicates the port is currently operating at 1000 Mbps.
■ Duplex Mode — Displays the port duplex mode. This field is
configurable only when auto negotiation is disabled, and the port
speed is set to 10M or 100M or 1000M per second. The possible field
values are:
■ Full — The interface supports transmission between the device and
its link partner in both directions simultaneously.
■ Half — The interface supports transmission between the device
and the client in only one direction at a time.
■ Flow Control — Displays the flow control status on the port.
Operates when the port is in full duplex mode. The possible field
values are:
■ Enable — Enables flow control on the port.
■ Disable — Disables flow control on the port.