3Com 2924-PWR Switch User Manual


 
170 CHAPTER 13: CONFIGURING QUALITY OF SERVICE
Viewing Bandwidth
Settings
The Bandwidth Summary Page displays bandwidth settings for a specified
interface.
To view Bandwidth Settings:
1 Click Device > QoS > Bandwidth > Summary. The Bandwidth
Summary Page opens:
Figure 84 Bandwidth Summary Page
The Bandwidth Summary Page contains the following fields:
Interface — Displays the interface for which rate limit and shaping
parameters are defined.
Ingress Rate Limit
Status — Indicates the ingress rate limiting status on the interface.
The possible field values are:
Enable — Ingress rate limiting is enabled on the interface.
Disable — Ingress rate limiting is disabled on the interface. This is
the default.
Rate Limit — Indicates the ingress traffic limit for the port. The field
range is 3,500-1,000,000 kbits per second.