Filter
Top Products
138 CHAPTER 9: CONFIGURING IP AND MAC ADDRESS INFORMATION
Defining Aging Time The Address Table Setup Page allows the network manager to define the
Address Table Aging Time. The Aging Time is the amount of time the
MAC addresses remain in the Dynamic Address table before they are
timed out if no traffic from the source is detected. The default value is
300 seconds.
The monitor users have no access to this page.
To define the Aging Time:
1 Click Monitoring > Address Table > Setup. The Address Table Setup
Page opens:
Figure 66 Address Table Setup Page
The Address Table Setup Page contains the following field:
■ Aging Time — Defines the amount of time the MAC address remains
in the Dynamic Address table before it is timed out if no traffic from
the source is detected. The default value is 300 seconds.
2 Enter the desired aging time.
3 Click . The MAC address table configuration is enabled, and
the device is updated.