Filter
Top Products
94 CHAPTER 5: MANAGING SYSTEM INFORMATION
■ Daylight Saving — Enables setting automatic Daylight Savings Time
(DST) on the device, either on a non-recurring or recurring basis. In the
non-recurring case, DST is configured to apply to one specific period
of time only, defined by specifying the begin and end times, months,
days, and years. Non-recurring settings need to be changed every
year. In the recurring case, the year is not specified, so that the time
and date settings apply to every year. The possible field values are:
■ USA — The device switches to DST at 2:00 a.m. from the second
Sunday in March, and reverts to standard time at 2:00 a.m. on the
first Sunday of November.
■ European — The device switches to DST at 1:00 am on the last
Sunday in March and reverts to standard time at 1:00 am on the
last Sunday in October. The European option applies to EU
members, and other European countries using the EU standard.
■ Other — The DST definitions are user-defined based on the device
locality. If Other is selected, the From and To fields must be
defined.
■ Time Set Offset — Sets the offset (in minutes) to be applied to the
system time at the beginning and end of DST. The default is 60
minutes. The field range is 1-1440.
■ From — Configures the non-recurring time and date on which DST
begins in countries other than the USA and Europe. The fields to set
are:
■ Hours — The hour of the day at which DST begins. The field range
is 0-23.
■ Minutes — The minute of the hour at which DST begins. The field
range is 0-59.
■ Month — The month of the year in which DST begins. The field
range is 1-12.
■ Day — The day of the month at which DST begins. The field range
is 1-31.
■ Year — The year in which DST begins. The field range is
2000-2037.
■ To — Configures the non-recurring time and date on which DST ends
in countries other than the USA and Europe. The fields to set are:
■ Hours — The hour of the day at which DST ends. The field range is
0-23.