Filter
Top Products
147
Viewing Spanning
Tree
The Spanning Tree Summary Page displays the current Spanning Tree
parameters for all ports.
To view Spanning Tree Summary:
1 Click Device > Spanning Tree > Summary. The Spanning Tree
Summary Page opens:
Figure 70 Spanning Tree Summary Page
The Spanning Tree Summary Page contains the following fields:
■ Port — Indicates the interface for which the information is displayed.
■ STP — Indicates if STP is enabled on the port. The possible field values
are:
■ Enable — Indicates that STP is enabled on the port.
■ Disable — Indicates that STP is disabled on the port.
■ Port Fast — Indicates if Fast Link is enabled on the port. If Fast Link
mode is enabled for a port, the port is automatically placed in the
Forwarding state when the port link is up. Fast Link optimizes the STP
protocol convergence. STP convergence takes 30 seconds and is not
dependent on the number of switches in the network.