Filter
Top Products
169
Configuring Trust
Settings
The Trust Setup Page contains information for enabling trust on the
device.
To enable Trust:
1 Click Device > QoS > Trust > Setup. The Trust Setup Page opens:
Figure 83 Trust Setup Page
The Trust Setup Page contains the following fields:
■ Trust Mode — Specifies which packet fields to use for classifying
packets entering the device. When no rules are defined, the traffic
containing the predefined packet CoS field is mapped according to
the relevant trust modes table. Traffic not containing a predefined
packet field is mapped to "best effort". The possible Trust Mode field
values are:
■ CoS — Classifies traffic based on the CoS tag value.
■ DSCP — Classifies traffic based on the DSCP tag value.
2 Define the fields.
3 Click . The selected Trust mode is enabled on the device.