Filter
Top Products
2
HARDWARE INSTALLATION
Installation Overview
This section describes the procedure for installing
the 3C971-F adapter hardware in your host
computer. Follow all applicable instructions included
with your system documentation for installing PCI
bus adapters. Hardware installation consists of
these basic steps:
■ Unpack the 3C971-F ATMLink PCI adapter.
■ Turn off the power to your computer and remove the
computer cover. Refer to your system
documentation for specific instructions.
■ Install the 3C971-F adapter in an available PCI slot.
■ Replace the computer cover.
■ Connect the appropriate cables.
■ Turn on the power to the computer.
Please observe all special notes and precautions.
For technical specifications on the 3C971-F adapter
hardware, see Appendix A.
Tools Required
The only tools required are a grounding strap and a
#1 Phillips head screwdriver.