Filter
Top Products
Configuring the LAN Emulation Clients (LECs)
3-17
Figure 3-11 LEC ATM Adapter Configuration
The information required for the client to contact the
LECS or the LES may vary according to the vendor
of the server. For example, if you select the LECS
option (radio buttons at bottom of dialog box in
Figure 3-11), 3Com’s Cellplex 7000
™
requires both
the ELAN name of the LES you want the client to
join and the 20-byte ATM Address of the
configuration server. Refer to the documentation for
your server(s) to determine the specific
requirements.
7 Edit the LEC ATM Adapter items.
a Select the client in the Client List Box that you
want to configure.
You may configure the clients in any order that
you wish; however, Client 0 must be fully
configured before exiting the dialog box.
b Enable the client if desired.
Put an “x” in the Enable box (not editable for
Client 0). All settings in the dialog box are ignored
for any disabled clients.