Filter
Top Products
3-20 CHAPTER 3: WINDOWS NT DRIVER INSTALLATION
After you select the
OK
button in the LEC
Configuration dialog box, the reboot prompt shown
in Figure 3-12 appears.
Figure 3-12 LECS/LES Reboot Prompt
10 Select
OK.
11 Exit Windows NT and reboot the computer.
Each time the computer is booted, the driver will
contact the LECS or the LES, whichever is enabled
for each client.
The 3C971-F adapter driver is designed to operate
transparently beneath the operating system protocol
stack. Refer to the
Microsoft Windows NT System
Guide
for detailed network interface configuration
instructions.
The installation of the LAN emulation SVC drivers for
the 3C971-F adapter is complete. Exit Windows NT
and restart the computer before running any
network applications.