Filter
Top Products
2-6 CHAPTER 2: HARDWARE INSTALLATION
12 Turn on the power to the computer.
When the computer power is turned on, the system
BIOS should enable the PCI slot and initialize the
3C971-F adapter configuration space.
The 3C971-F ATMLink PCI adapter is plug-and-play
with systems that are compliant with the PCI Local
Bus Revision 2.1 specification. Computers that are
not compliant may require manual configuration
using a PCI Device Configuration menu in the BIOS.
See your system documentation for PCI device
configuration.
The installation of the hardware for the 3C971-F
ATMLink PCI adapter is complete.
The next step is to install the network software
driver for the adapter card. Refer to Chapter 3 for
Windows NT™ 3.51 workstations and servers, or to
Chapter 4 for NetWare™ 4.1 servers.