Filter
Top Products
F
IGURES
1-1
3C971-F ATMLink PCI Adapter 1-1
2-1
Removing Expansion Slot Cover 2-3
2-2
Adapter Card Installed in Chassis 2-3
2-3
SC Duplex Connection 2-5
3-1
Network Settings Screen 3-5
3-2
Add Network Adapter 3-5
3-3
Selecting the Floppy Drive 3-6
3-4
Loading the 3C971-F Adapter Hardware Driver 3-7
3-5
PCI Adapter Setup 3-7
3-6
Configuring the Signaling Transport 3-9
3-7
Completed Network Settings 3-10
3-8
TCP/IP Configuration with Sample Entries 3-11
3-9
Reboot Prompt for Adapter Driver 3-14
3-10
LEC Configuration 3-15
3-11
LEC ATM Adapter Configuration 3-17
3-12 LECS/LES Reboot Prompt 3-20
3-13 Removing 3C971-F Adapter and Drivers 3-21
3-14 Confirming Adapter and Driver Removal 3-22
3-15 Network Settings After Driver Removal 3-22
3-16 Reboot Prompt for Removing Drivers 3-23
4-1 NetWare 4.1 Installation Options 4-3
4-2 NetWare Driver Options 4-3
4-3 Select Additional Driver 4-4
4-4 Currently Installed Drivers 4-4
4-5 Notes for Selecting a Drive 4-5
4-6 Selecting a Driver from the 3Com Diskette 4-5
4-7 SVC Driver Confirmation 4-6
4-8 Driver Protocols/Parameters Edit 4-6
4-9 Configuring TCP/IP Network Interface 4-8